Solar Technologies, Inc.
147 S. River Street, Suite 207, Santa Cruz, CA 95060
(831) 460-1250 or (800) SOLQUEST (765-7837)
sales@solartechnologies.com

May 18, 2001

Proposal for 5500 Watt Grid Intertie and Battery Backup Solar Electric Generation System

Project Site:

 

Site Location:

 

System Type:

Utility intertie w/ net metering, with battery back-up, 48 VDC nominal input, 120 VAC output

Total Array Power:

5,880 Watts Peak DC

Mounting:

Collectors to be mounted flush to roof with stand-off brackets

Solar Access:

Unshaded, nominal south facing roof area. Approximately 600 sq. ft required.

Estimated Energy Production:

7,150 kwhr/year, based on Northern California Average Solar Radiation in non-coastal areas

We are very pleased to present this proposal for a solar electric generation system. All Components are UL listed and certified for the CEC Buydown Rebate Program.

Components:

  1. Quantity 56 Photowatt PW1000-105 Solar Modules.
  2. These 56 modules are to be wired in 14 series-strings of 4 modules each. Each series-string output is a nominal 48 VDC.

  3. Module Peak Power Rating: 105 Watts
  4. Total Array Rating: 4,200 Watts
  5. Panel dimensions: 52.56 in x 26.5 in x .96 in.
  6. CEC Buydown Module Rating: 94.6 Watts.
  7. Total Array Area Required for 40 panels: 400 sq ft
  8. Mfg. Warranty: 25 Years
  9. Quantity 14, UniRac Flush Mount Model U-RF/104L Roof Mount Module Racks, which feature lightweight, corrosion resistant, durable aluminum construction. There are no painted steel components that can rust. All hardware is stainless steel or zinc plated to provide maintenance free racks for a lifetime. Designed and warranted to withstand 120 mph winds. Made in the USA.
  10. Number of PV panels per modules: 4
  11. Material: Aluminum Structure, SS Hardware
  12. Tilt Angle: Fixed at existing roof slope
  13. Roof Attachment Penetrations: 40
  14. Unit Ship Box Dimensions: 4 x 4 x 104 in. each
  15. Unit Ship Weight: 30 lbs
  16. Quantity 1, Trace Engineering PP-SW5548/S Power Panel Inverter which features Sine Wave Power, peak efficiency to 96%, Utility Interactive Sell Mode, LCD data and programming panel, all NEC/UL required DC and AC input/output over-current protection and disconnect breakers factory pre-wired and installed on a powder coated steel back plate. UL Listed. Made in the USA.

  17. Continuous Power Output: (5500 Watts)
  18. AC Voltage Output: 120 VAC Nominal
  19. Input: 48 VDC Nominal
  20. Peak Efficiency: 96%
  21. For indoor use only.
  22. Ask for spec sheet for further details.
  23. Mfg. Warranty: 5 Years Factory Extended
  24. Balance of system components:
TOTAL PRICE OF COMPONENTS, FOB Factory $40,800.00

Less CA Buydown Rebate (see below)

(22,648.00)

Additional Buydown available for battery system

    (750.00)

Net Cost of Components

$17,402.00

Installation:

Solar Technologies arranges complete turn-key installation and commissioning services with licensed contractors and will be glad to provide a proposal for your specific requirements. Estimated installation costs for the above system is $3,500 - $6,000 depending on the roof type and wiring requirements. If the owner prefers to self-install or subcontract all or part of the installation to a contractor of his choosing, we can provide installation coordination and engineering services for a fee.

Rebates:

The California Energy Commission (CEC) Emerging Renewables Buydown Program rebates will reduce the net cost of the above system components by $22,648.00. This figure is based on the CEC certification ratings of 94.6 Watts for the Photowatt PW1000-105 Modules, and 95% efficiency for the Trace SW5548 Inverter. The CEC certification rating of 94.6 Watts/module is based on PTC (PVUSA Test Conditions) power rating which is more conservative than the STC (Standard Test Conditions) power rating of 105 Watts listed in the manufacturers specifications. The above rebate estimate is therefore based on 56 modules at 94.6 watts each multiplied by the inverter efficiency of .95 equaling 5,033Watts CEC Certified System Rated Output. The CA Buydown rate is $4.50 per CEC Watt, or 50% of the system cost, whichever is less.

The applicable "maximum" Buydown for this system is $22,648.00, provided it does not exceed 50% of the systems "total cost" including the equipment cost outlined above, installation costs, permitting fees, and sales tax. You will receive a check directly from the State of California after you have completed the installation and presented a copy of the signed-off building permit.

Included in the system component pricing above are the following services:

Not included in this proposal unless arranging installation through Solar Technologies:

Not included in this proposal:

Delivery: 3-4 weeks ARO

Quotation Validity: 30 days

Terms: 50% with order, balance due on delivery, Cash, Check, or Credit Card Accepted (small surcharge added for credit card payments)

Notes: Prices subject to change without notice. Pictures above are representational. Details of actual hardware delivered may be slightly different. We reserve the right to substitute PV collector of equal or better quality and power generation characteristics.


Thank you again for the opportunity to provide this proposal. We will look forward to working with you on this project and will do everything possible to exceed your expectations and insure your lasting satisfaction!

Sincerely,

 

______________________________
Solar Technologies

Approved by:______________________________________

Date: ____________________